ATX Mid Tower
Black / Red
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-C
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
320 mm / 12.598"
Internal 2.5" Bays
Internal 3.5" Bays
- 191 points
- 47 months ago
from completed build Rehousing project
The case came really well packed inside it's own cloth bag with fitted dense foam in a very sturdy box. Came with loads of extra screws and bolts and a decent cleaning cloth. A free stick on headphone hanger was included but they sent me a white one so I'm not going to use it.
I love the tempered glass look and the lattice aluminium construction of the front. Cable management options are decent with plenty of room behind the mobo but has no fixed tie down points, it came with stick on tie down points that came off after about 5 mins so I purchased some others from my local PC shop that worked out much better.
It only comes with one fan and at this price I would have liked to see 2 or 3 fans included. A built in fan controller would also have been nice.
The USB 3 type C connector is a nice addition but is of little use to me at the moment. Hopefully more peripherals will adopt this standard in the future.
No front intake at all, the only intake is on the bottom of the case and you have to remove the hard drive caddy to fit up to two 120mm fans, so keep that in mind.
No problems fitting my 280mm radiator in the front. It was a breeze thanks to the removable bracket.
The rear I/O is set into the case (it's not flush with the back) so if you have large connectors there may be an issue but was fine for me.
- 29 points
- 53 months ago
from completed build Oblivion Wing - 805 Case Red/Black Yveltal Theme.
By far one of the best looking mid towers out there. Only quality aluminium and tempered glass is used throughout the entire case (Not counting the dust filter, hard drive caddies).
Very good build quality, excellent features with space for 2x140mm,3x120mm fans (with HDD cage removed). More then ample room for cable management with plenty of routing holes that are all smoothed out. 3x SSD sleds on the back of the motherboard tray and 1x in the front compartment, can house 2x 3.5inch HDD/or 2.5inch SSD in caddies. Ample power supply room for even the longest power supplies and can fit ATX/E-ATX motherboards. Can fit almost any graphics card, no matter how long or tall. Plenty of room for watercooling enthusiasts.
- 19 points
- 39 months ago
from completed build My project for the horde!
Looking for perfect combination sexy and cute? buy this one!
- 14 points
- 42 months ago
from completed build Dad PC Upgrade
BEAUTIFUL! This case is INSANELY BEAUTIFUL! It has USB 3.0 type A and C, as well as two USB 2.0 type A ports. It also sports great lighting, tinted and tempered glass side panels, and looks great if you throw led's inside. The only downside is cable management is REALLY hard in this thing, but the looks make up for it. If you're going to get this i'd suggest getting a Corsair PSU on account of their flat cables, or get custom cables that have a low profile. Also, a modular power supply is a must, if you don't want this case to get messy.
- 13 points
- 29 months ago
from completed build ZenHive ft. FTW3 [1st Complete Build]
1 star knocked off for the fact the front fans don't act as intake fans due to an acrylic panel at the front
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters